+86 135 3053 5995


We use our own and third-party cookies to ensure the proper functioning of the web portal and its complements, perform navigation analysis and show multimedia content. If you continue browsing, you accept the use of this technology. For more information please see our Cookies Policy. Learn more


How to Improve the Quality of Full Color LED Display?

2018-07-03 www.myddisplay.com

The display effect of the full color LED display is directly related to the user and the audience. To get a perfect experience, it is necessary to control and improve the quality of the LED display. So, how to control and improve the quality of full color LED display? What are the important indicators that reflect the quality of LEDs for full color LED displays?

LED devices are the most critical components of full color LED displays have three reasons:

First of all, LED is the most used key component in the full color led screen, using thousands to tens of thousands of LEDs per square meter.

Secondly, LED is the main body that determines the optical display performance of the whole LED screen, which directly affects the audience's evaluation of the LED display screen.

What's more, LEDs account for the largest share of the overall cost of the LED display, ranging from 30% to 70%. The choice of LED determines the quality of the entire display by more than 50%. If the LED is not selected well, the other parts of the display will not be able to compensate for the defect in the quality of the display.

Meiyad Outdoor Full Color LED Display

The main indicators reflecting the quality of LEDs for full color LED displays are:

1. Failure Rate

Since the full color led display is composed of tens of thousands or even hundreds of thousands of red, green and blue LED elements, the failure of any color LED will affect the overall visual effect of the display. Generally speaking, according to industry experience, the failure rate before the LED display starts to assemble to the aging 72 hours before shipment should be no more than three ten thousandth (refer to the failure caused by the LED device itself).

2. Antistatic ability

LEDs are semiconductor devices that are sensitive to static electricity and are highly susceptible to electrostatic failure. Therefore, antistatic capability is critical to the life of the LED display. In general, the LED's human body static mode test failure voltage should not be lower than 2000V.

3. Consistency

The full color led display is composed of countless red, green and blue LEDs. The brightness and wavelength consistency of each color LED determine the brightness consistency, white balance consistency and chroma consistency of the entire display.In general, display manufacturers require device vendors to provide LEDs with a wavelength range of 5 nm and a brightness range of 1:1.3. These specifications can be achieved by device suppliers through a spectral color separation machine. The consistency of the voltage is generally not required.

4. Brightness

LED brightness is an important determinant of display brightness. The higher the brightness of the LED, the larger the margin of current used, which is beneficial for saving power and keeping the LED stable. LEDs have different angle values. In the case where the brightness of the chip is fixed, the smaller the angle, the brighter the LED, but the smaller the viewing angle of the display. Generally, a 100 degree LED should be selected to ensure a sufficient viewing angle of the display.For displays with different dot pitches and different viewing distance, a balance should be found in brightness, angle and price.

5. Attenuation characteristics

The red, green, and blue LEDs all have the characteristic of the brightness attenuating as the working time increases. The advantages and disadvantages of the LED chip, the quality of the auxiliary materials and the level of the packaging process determine the attenuation speed of the LED. Generally speaking, after 1000 hours and 20 mA of normal temperature lighting test, the attenuation of red LED should be less than 10%, and the attenuation of blue and green LED should be less than 15%. The consistency of red, green and blue attenuation have a great affect on the white balance, which in turn affects the display fidelity of the display.

Tel: +86 135 3053 5995 Skype
Email: sales@mydled.com 在线咨询

WeChat Scan, get FREE quote WeChat Scan, get FREE quote