Meiyad Sphere LED Screen Leads the Trend of Visual Art

Home > News > Industry News > Meiyad Sphere LED Screen Leads the Trend of Visual Art

Meiyad Sphere LED Screen Leads the Trend of Visual Art

2024

After years of development, LED display technology has significantly surpassed the traditional flat display mode. Currently, flexible led screens and creative led display products are beginning to attract much attention in the market. Among them, the sphere LED screen is a new type of display screen with a spherical structure that can provide 360-degree all-round viewing capabilities, thereby bringing a new visual experience to the audience. And the picture quality is exquisite and the picture has a strong three-dimensional sense.

Meiyad indoor P2 and outdoor P5 sphere led screens in ISLE 2024

Sphere LED screens are mainly used in planetariums, science and technology museums, theme parks, museums, flying theaters and other fields. The technology is currently mature, but the overall number is still relatively small, so consumers rarely have the opportunity to experience it in person. However, as sphere LED screens become famous around the world and demand increases, we will have more opportunities to experience the super shocking entertainment experience brought by this high technology.

Meiyad outdoor P4 sphere led display in ISLE 2023

Compared with the traditional projection sphere screen, the advantage of the sphere LED screen is that it adopts autonomous light-emitting technology, stepless brightness control, a refresh rate of up to 3840Hz, a more stable and smooth picture, good brightness uniformity, a contrast ratio of 10000:1, and ultimate black performance and richness. The grayscale level far exceeds the high brightness and wide color gamut of traditional projection methods, and the 8K/16K image quality performance allows scenes that are difficult to restore with traditional sphere screens to be beautifully reproduced. Therefore, the sphere LED screen has been widely praised since its launch.

Meiyad indoor P2 sphere led screen in Shanghai, diameter 1m

Meiyad sphere led display in workshop

Up to now, there are many sphere LED screens around the world. Among them, the MSG Sphere project in Las Vegas, USA is currently the largest sphere LED screen in the world, with a total cost of 2.3 billion US dollars. It can accommodate 20,000 people at the same time to watch movies or performances together. In June 2023, it was lit up for the first time, immediately setting off a craze for watching the sphere LED screen! At the CES exhibition held in Las Vegas at the beginning of the year, many exhibitors and visitors took the opportunity to check in, once again igniting the enthusiasm for sphere LED screens.

MSG Sphere project in Las Vegas

In China, there are only a handful of companies involved in the field of sphere LED screens, and Meiyad is one of the leaders. Meiyad focuses on the design and manufacturing of special-shaped customized led screens, and its technical strength is recognized in the industry.

Meiyad Integrates Flexible LED Screens into XR Solutions

Creativity is Priceless, The Collision of LED Screen and Art

Project OverviewWith the rapid development of smart cities and digital advertising, outdoor LED displays have become an effective solution for delivering dynamic information in public spaces. Recently, we successfully completed an outdoor LED pole display project in Romania, supplying 20 units of P3.076 LED pole displays for an urban digital signage application.Designed for outdoor environments, these LED displays provide clear visibility, flexible content management, and reliable performance for advertising, public information, and commercial communication.This project demonstrates how LED pole displays can transform traditional urban spaces into modern digital communication platforms.Project DetailsProject Location: RomaniaProduct: Outdoor P3.076 LED Pole DisplayQuantity: 20 UnitsDisplay Size: 1280mm (W) × 960mm (H)Display Type: Double-sided LED DisplayApplication: Outdoor advertising and digital signageThe project uses double-sided LED pole displays, allowing content to be viewed from multiple directions. This design improves communication efficiency and maximizes advertising exposure along streets and public areas.Why Choose P3.076 Outdoor LED Pole Displays?As outdoor advertising continues to evolve, traditional static signs are gradually being replaced by digital solutions. Compared with conventional advertising boards, LED pole displays provide more flexible and engaging communication possibilities.High Visibility for Outdoor ApplicationsThe P3.076 LED displays are designed with high brightness performance, ensuring clear and vivid images even in outdoor environments with strong daylight.Whether used for advertisements, announcements, or public information, the screens deliver excellent visual performance throughout the day.Double-Sided Display for Wider Audience ReachA key feature of this project is the double-sided LED display design.By displaying content on both sides, the LED pole screens can reach pedestrians and vehicles from different directions, increasing exposure and improving advertising effectiveness.This makes them ideal for:- City streets- Commercial districts- Shopping areas- Transportation areas- Public information displaysSpace-Saving Pole-Mounted DesignThe pole-mounted structure allows LED displays to be installed efficiently without requiring additional advertising structures.By utilizing existing street infrastructure, cities and businesses can create digital advertising networks while maintaining a clean and modern urban environment.Reliable Outdoor PerformanceOutdoor LED displays need to operate reliably under different weather conditions. These LED pole displays are designed for long-term outdoor use with stable performance, making them suitable for various climates and applications.Installation and Project ImplementationDuring the installation process, our technical team completed the display mounting, cable connection, system testing, and image calibration to ensure smooth operation.The final installation integrates the LED pole displays naturally into the surrounding environment, creating an attractive and functional digital signage network.The project not only improves outdoor advertising opportunities but also enhances the digital communication capability of the local area.Applications of LED Pole DisplaysLED pole displays are becoming increasingly popular worldwide due to their flexibility and wide range of applications.Common applications include:- Outdoor advertising campaigns- Smart city information systems- Public announcements- Event promotion- Commercial area communication- Traffic and transportation informationWith their compact structure and powerful display capability, LED pole displays provide an efficient solution for modern outdoor communication.Professional Outdoor LED Display SolutionsAs a professional LED display manufacturer, we provide customized outdoor LED solutions for global customers, including LED pole displays, outdoor advertising screens, and smart digital signage systems.From product design and manufacturing to installation support, we are committed to delivering reliable LED display solutions that meet different market requirements.This Romania LED pole display project represents our capability to provide high-quality outdoor digital signage solutions for international customers.Looking for a reliable outdoor LED display supplier for your next project? Contact us for customized LED pole display solutions.

10｜10｜2026

SP Series Rental LED Screen Cabinet Operation Guide: Assembly, Curving, and Maintenance

Rental LED screens are widely used for concerts, exhibitions, conferences, stage performances, and other live events. Efficient cabinet assembly, flexible screen configuration, and convenient maintenance are essential for ensuring smooth installation and reliable operation.The SP Series rental LED screen cabinets support different assembly configurations, including flexible cabinets, standard cabinets, angled cabinets, and 500 × 1000 mm cabinets. With their cabinet locking mechanisms and adjustable curvature locks, users can assemble LED screens to meet different event and stage design requirements.This guide provides step-by-step instructions for bending flexible cabinets, connecting different cabinet types, adjusting curvature locks, creating inward and outward curves, and performing LED module and power supply maintenance.How to Bend a Flexible Rental LED Screen CabinetFlexible LED cabinets allow users to create curved rental LED screens for stage backdrops, exhibitions, and other event applications.Follow these steps to bend a flexible cabinet:1. Remove the cabinet locking clips before bending.2. Hold the cabinet handles firmly with both hands.3. Press the spring tabs at the upper ends of the handles.4. Carefully bend the cabinet to form the desired curved shape.5. Observe the graduated scale next to the spring tabs while bending.6. Use the scale readings to control the cabinet's curvature.Pay close attention to the scale during adjustment to achieve the desired bending angle.How to Connect Flexible LED CabinetsProper alignment is important when connecting flexible cabinets to build a rental LED wall. The cabinets can be connected horizontally and vertically.Horizontal Cabinet ConnectionBring the side edges of the cabinets close together.Align the cabinet edges and ensure that the display surfaces are level and flush.Insert the side locking pins into the corresponding locking holes.Press the handles to secure the locking mechanism.Lock the lower locking mechanism as well.Check the cabinet alignment and adjust the position as needed.Insert and secure the locking pins completely.Repeat these steps when connecting additional cabinets. Check the surface alignment throughout the assembly process to maintain a consistent display plane.Vertical Cabinet ConnectionWhen connecting flexible cabinets vertically, follow these steps:1. Position the upper cabinet above the lower cabinet.2. Align the locating holes on the bottom of the upper cabinet with the locating pins on the top of the lower cabinet.3. Lower the cabinet so that the locating pins fit into the corresponding holes.4. Insert all three locking pins.5. Secure all three pins and check that the cabinets are firmly connected.Ensure that the locating pins are correctly aligned and all three locking pins are fully secured before continuing the installation.How to Connect Standard Rental LED CabinetsStandard LED cabinets are suitable for assembling flat rental LED screens for concerts, exhibitions, conferences, and other event applications.Follow these steps to connect standard cabinets:1. Bring the side edges of the cabinets close together.2. Align the cabinets and ensure that the display surfaces remain level.3. Insert the locking pins into the corresponding locking holes.4. Secure the locking pins.5. Check that the cabinets are properly aligned and firmly connected.Repeat the process for the remaining cabinets to complete the rental LED display.How to Adjust the Curvature LockThe curvature lock is used to adjust and secure the cabinet angle when creating curved LED screen configurations.Follow these steps to adjust the curvature lock:1. Open the operating lever on the curvature lock.2. Check the graduated scale and adjust the curvature to the desired setting.3. Press the lever downward to lock the curvature setting.4. Check the two curvature locks on the side of the cabinet.5. Adjust both locks to matching angles according to the scale.Ensure that the two curvature locks have consistent settings before proceeding with cabinet assembly.How to Create Inward and Outward Curved LED ScreensBy adjusting the curvature locks to different scale settings, users can create inward-bending or outward-bending configurations during cabinet assembly.Inward-Bending Cabinet ConnectionTo create an inward-bending configuration:1. Adjust the curvature locks to the required negative scale setting.2. Bring the cabinet sides together.3. Align the cabinets and connect them using the designated locking mechanism.4. Secure the locking pins.5. Check the resulting screen curvature.The negative scale setting allows the cabinets to be connected in an inward-bending configuration, as demonstrated in the operation video.Outward-Bending Cabinet ConnectionTo create an outward-bending configuration:1. Adjust the curvature locks to the required positive scale setting.2. Bring the cabinet sides together.3. Align the cabinets and connect them using the designated locking mechanism.4. Secure the locking pins.5. Check the resulting screen curvature.The positive scale setting allows the cabinets to be connected in an outward-bending configuration, as demonstrated in the operation video.Always refer to the scale markings on the actual cabinet when adjusting the curvature.How to Connect Angled Rental LED CabinetsAngled LED cabinets are designed for screen configurations that require angled joints or right-angle connections.Standard Connection of Angled Cabinets1. Bring the side edges of the cabinets close together.2. Align the cabinets and keep the display surfaces level.3. Insert the locking pins into the corresponding locking holes.4. Secure the locking pins.5. Check that the cabinets are properly aligned and connected.Creating a Right-Angle Connection with Angled CabinetsWhen using angled cabinets to create a right-angle connection, adjust the locking components as follows:1. Remove the curvature lock.2. Remove the spacer block from the angled locking pin.3. Reinstall the spacer block in the inward-facing position.4. Bring the angled cabinet sides together vertically.5. Ensure that the angled edges fit closely together.6. Insert the locking pins and secure them.7. Lock the lower locking pins in the same way.Check that all locking points are secured and the angled edges remain closely aligned.How to Connect 500 × 1000 mm Rental LED CabinetsThe SP Series also includes 500 × 1000 mm LED cabinets for building rental LED screens in different sizes and configurations.Follow these steps to connect the cabinets:1. Adjust the curvature lock to the required angle.2. Bring the side edges of the cabinets close together.3. Align the cabinets and ensure that the display surfaces remain level.4. Insert the locking pins into the corresponding locking holes.5. Secure both locking pins on the side of the cabinet.Once both side locking pins are fully secured, the cabinets can be connected as required to assemble the rental LED display.Rear Maintenance: Removing and Installing an LED ModuleRear maintenance allows technicians to remove and reinstall LED modules from the back of the rental LED screen cabinet.Removing an LED Module from the Rear1. Rotate open the locking plates along the upper and lower edges of the module.2. Hold the module handle and push the module forward to release it from its mounting position.3. Tilt the module and guide it out through the designated opening.4. Disconnect the safety cord.5. Remove the module.Installing an LED Module from the Rear1. Attach the safety cord first.2. Guide the module through the designated opening.3. Hold the handle and align the module with its installation position.4. Pull the module backward into the cabinet.5. Secure all the module locking levers.6. Check that the module is correctly positioned and firmly locked.The rear maintenance procedure is complete once the module is securely installed.Front Maintenance: Removing and Installing an LED ModuleFront maintenance allows technicians to access an LED module from the front of the rental LED panel.Removing an LED Module from the Front1. Rotate open the locking levers along the upper and lower edges of the module.2. Use a compatible suction tool to remove the module from the front.3. Disconnect the safety cord.4. Remove the module carefully.Installing an LED Module from the Front1. Attach the safety cord before installation.2. Align the module with its designated mounting position.3. Position the module directly against the cabinet.4. Ensure that the module is correctly seated.The front maintenance procedure is complete once the module is installed in the correct position.Power Supply Maintenance: Removing and Installing the Power Supply BoxProper power supply maintenance helps technicians service the rental LED display cabinet when necessary.Removing the Power Supply Box1. Disconnect the power and follow the appropriate electrical safety procedures.2. Open the locking clips on both sides of the power supply box.3. Remove the power supply box from the cabinet.Installing the Power Supply Box1. Ensure that the power is disconnected.2. Align the power supply box with the corresponding interface.3. Press the box firmly into place until it is fully seated.4. Secure the locking clips on both sides.5. Check that the power supply box is correctly installed and both locking clips are secured.Complete the required inspection before reconnecting power.Practical Tips for Rental LED Screen Assembly and MaintenanceTo help ensure efficient installation and reliable operation, keep the following points in mind when working with SP Series rental LED screens.Check cabinet alignment. Ensure that adjacent cabinets are properly aligned and that their display surfaces remain level.Secure all locking mechanisms. Check the locking pins, lower locks, and other designated connection points during assembly.Monitor the curvature scale. When bending flexible cabinets or adjusting curvature locks, use the scale readings to control the setting.Check both curvature locks. Ensure that the two locks on the side of the cabinet are adjusted to matching angles.Handle LED modules carefully. Follow the specified removal and installation procedures when performing front or rear maintenance.Observe electrical safety procedures. Disconnect the power before removing or installing the power supply box.Refer to the operation video. Use the accompanying video as a visual reference for cabinet assembly, curvature adjustment, and maintenance procedures.ConclusionThe SP Series rental LED screen cabinets provide flexible options for assembling LED displays for concerts, exhibitions, conferences, and other live events. Understanding the correct cabinet connection methods, curvature lock adjustments, and module maintenance procedures helps technicians work more efficiently during installation and servicing.Whether you are building a flat rental LED screen, an inward-bending or outward-bending display, or a right-angle LED wall, following the correct operating procedures is essential for achieving proper cabinet alignment and reliable connections.For more information about SP Series rental LED displays and professional event LED screen solutions, contact our team to discuss your project requirements.

Send Your Inquiry Today

Factory Direct LED Screen - Fast Quote, Best Price!

Please enter your company name

Please accept the data protection information

I have read and understood the data protection information.

Meiyad Sphere LED Screen Leads the Trend of Visual Art

Meiyad Sphere LED Screen Leads the Trend of Visual Art

You May Also Like

Romania Outdoor LED Pole Display Project: A Smart Digital Signage Solution for Urban Advertising

SP Series Rental LED Screen Cabinet Operation Guide: Assembly, Curving, and Maintenance

Send Your Inquiry Today

Products

Solutions

Showcases

About

Contact Us

Contact Us

ARBURG uses cookies

Cookie Policy