CN

×

keywords:

xxxx1 xxx2 xxx3 xx4 copy
Shenzhen Meiyad Optoelectronics Co., Ltd. Shenzhen Meiyad Optoelectronics Co., Ltd.

News

Meiyad’s Immersive CAVE-R Experience Steals the Spotlight at ISLE 2025 Exhibition

07
03
2025

Table of Contents

ISLE 2025 International Smart Display and System Integration Exhibition was grandly held today on the 7th. Meiyad displayed many creative LED displays and solutions at the exhibition. Meiyad invited visitors to explore the future of immersive experiences alongside global clients.

Booth number: Hall 8 A10-A20 (270 sqm double booth)

1. Metaverse Immersive CAVE-R Solution

The star of the show was the debut of Meiyad’s CAVE-R, a revolutionary solution blending virtual reality (VR), augmented reality (AR), and mixed reality (MR) into a seamless immersive experience. This innovation allows users to step into a hyper-realistic virtual world without headsets or specialized glasses, delivering unparalleled visual impact with an 8K resolution, 7680Hz refresh rate, and support for 16K active 3D mode switching.

The CAVE-R captivated audiences with its versatility, enabling applications such as live sports broadcasting, VR gaming, virtual film production, interactive education, and 3D industrial modeling (e.g., SolidWorks integration). Its multi-modal interaction system—including motion recognition, touch controls, and VR peripherals—drew overwhelming attention. Live demos highlighted its use in virtual filming, urban exhibitions, cultural tourism, live events, and education, earning acclaim from domestic and international clients alike.

2. Three-Tier Ring Lift LED Screen

The circular lifting LED screen adopts P1.86 flexible modules, and the whole screen adopts lightweight cabinet design, and the weight of a single cabinet is only 28kg/㎡. It supports customized double-sided display, and through the lifting structure programming, it can realize the interaction between video and structure to create a technological atmosphere. It is widely used in corporate exhibition halls, science and technology exhibition halls, hotel lobbies, supermarket lobbies and other fields.

3. Glasses-free 3D Curved Corner Rental LED Screen

High-end rental-SD series, the 90-degree curved corner cabinet is used in glasses-free 3D. The module size is 250*500mm, and the refresh rate can reach up to 7680Hz. It can be spliced in special shapes (500*500 and 500*1000 cabinets are staggered). The cabinet supports front and rear maintenance. HUB wireless connection. It supports ring, cube, inner and outer arc, U-shaped, floor tile, hoisting, 90-degree arc cabinet. This product is widely used in virtual shooting, concerts, press conferences, exhibitions, rental scenarios and other application scenarios.

4. COB Curved All-in-One LED Screen

Breaking away from flat LED panels, Meiyad COB Curved All-in-One LED Screen adopts flexible modules in P0.93/P1.25/P1.56, offering 110”/135”/163” sizes with 2K/4K resolution. Tailored for mid-to-high-end conference rooms, government lecture halls, conference halls.

5. Spiral LED Screen

The spiral LED screen is a standardized product. The shape of a vase and the artistic atmosphere of spiral DNA add a sense of modern design art to the interior space, creating a romantic atmosphere. It is plug-and-play. The product was first released last year, with traffic exceeding hundreds of thousands on domestic and foreign social media platforms, and was also praised by domestic and foreign customers on site. It is widely used in application scenarios such as art galleries, science and technology museums, and large hotels.

Special Event: Celebrate Women's Day with Meiyad!

On March 8th, Meiyad will gift 999 roses to all female visitors at our booth—a heartfelt tribute to women's achievements. Drop by to claim your bloom and join the celebration!

ISLE 2025 is in full swing, and the channel product solutions will be unveiled tomorrow. Meiyad sincerely invites you to visit and experience (booth number Hall 8 A10-20) to explore the infinite possibilities of immersive creativity together!

You May Also Like

Meiyad Continues to Shine on Day 2 of SEAMEX 2026 in Malaysia

22|05|2026

Meiyad Continues to Shine on Day 2 of SEAMEX 2026 in Malaysia

Today marks the second day of SEAMEX 2026 in Malaysia, and Meiyad continues to attract strong attention from visitors, partners, and industry professionals across Southeast Asia.At Booth A033, Meiyad is showcasing a wide range of innovative LED display solutions, including the high-end SK Rental LED Screen, COB LED displays, SMD LED displays, and GOB LED display technologies. These products demonstrate Meiyad’s professional capabilities in stage rental, commercial display, cultural tourism, and immersive audiovisual applications.Throughout the exhibition, Meiyad’s booth has welcomed many customers and industry partners who showed great interest in the outstanding visual performance, seamless display quality, and creative customization solutions of our LED displays. The event also provides an important platform for Meiyad to strengthen cooperation with Southeast Asian clients and further expand our presence in the regional market.As SEAMEX 2026 enters its final day tomorrow, Meiyad warmly welcomes more visitors to Booth A033 to explore our latest LED display technologies and discuss future cooperation opportunities.We sincerely appreciate the support and trust from all customers, partners, and visitors, and we look forward to creating more innovative audiovisual experiences together.Exhibition: SEAMEX 2026Booth: A033Location: Borneo Convention Centre Kuching, Malaysia

LED Display Screen Software Installation and Debugging Tutorial

20|05|2026

LED Display Screen Software Installation and Debugging Tutorial

Software Installation, Login & Screen ConfigurationDownload & InstallationOfficial website download:Visit NovaStar official website(www.novastar-led.cn or https://www.novastar.tech) → Support → Software Download, and download the latest version of NovaLCT (recommended v5.5.0 or above).Installation steps:I. Double-click the installation package.II. Use the default installation path.III. Complete installation.IIII. Disable antivirus software temporarily to avoid accidental blockingDevice ConnectionSynchronous System (Direct Network Cable Connection)Step 1: PC → Sending Card: Connect directly via USB cable; or Connect through the same LAN using network cable. (Default IP range: 192.168.0.xxx / 192.168.1.xxx)Step 2: Sending Card → Receiving Card: Cascade via network cables. Receiving card connects to the LED screen HUB board.Asynchronous System (WiFi Direct Connection)Step 1: Connect PC/mobile phone to the player box WiFi (Default SSID: AP + last 8 digits of SN, Password can be found on the device label); or connect through the same LAN.Step 2: Connect the player box to the HUB board (receiving card) and power on.Software LoginStep 1: Open NovaLCT,Click Login→Advanced Synchronous Login,Default password:666 or admin.Step 2: Successful connection message: "Control System 1, No Display Screen"; If connection fails, check wiring and check power supply.Smart ConfigurationStep 1: After login, enter Screen Configuration → Smart Settings.Step 2: Select Chip model, Decoding method, Module size (e.g. 172x86), click Next stepStep 3: Follow the screen instructions: Bright line direction→Color matching→Pixel-by-pixel calibration, generate configuration file (.scfg).Step 4: Click Send to apply parameters to the receiving card.Manual ConfigurationStep 1: Receiving Card Parameters: Enter Receiving Card → Port Configuration → Set width, height, number of data groups, and scan mode (e.g. 1/32 scan).Step 2: Sending Card Resolution: Enter Sending Card → Output Resolution → Enter actual screen resolution (e.g. 1920×1080) → Enable scaling → Click Send.Step 3: Load Configuration File: Supports local (.scfg/.zip) or cloud configuration files. Allows quick parameter reuse. [__LINK_ICON].Program Creation & Publishing (Asynchronous System)Pingjl Installation & OperationStep 1: Download Pingjl from the official website. Double-click the installation file and follow the Pingjl. After first launch, select "Asynchronous Playback" mode. Click "Start Now".Step 2: Open Pingjl and add devices: (Search LAN/WiFi devices, Default password: admin).Step 3: Create a new program: Program Management → New Program. Set resolution matching the screen.Step 4: Add media: Support Add media, Videos (MP4/AVI), Text, Clock, Weather forecast.Step 5: Edit attributes: Playback duration, Transition effects, Loop mode, Multi-layer overlay supported.Program PublishingStep 1: Select the program→Click Publish→Select target terminal→Confirm sending.Step 2: After successful publishing, the player box automatically loads and plays the program. If publishing fails, check network connection→Check device storage.Device Management, Maintenance & Firmware UpgradeFirmware UpgradeEnter Program Upgrade→Connect to the Internet, Select cloud upgrade, Choose corresponding sending card / receiving card firmware, Wait for completion, Do not power off during upgrade.Offline Upgrade:Import local firmware package (.bin), batch upgrade devices:Step 1: Login through "Login → Advanced Synchronous Login",enter password admin or 666. (For asynchronous products (JT/TB series), select Media Player Login)Step 2: Type "admin"or "666888" on the main interface.Step 3: Select communication port. If you need to reconnect the sending card, click "Reconnect".Step 4: Select the range to view, click "Refresh" to view the current software version of the hardware.Refresh All: View all sending/receiving card versions.Specified Refresh: View the software versions of the specified sending and receiving cards.PS: Simply click "Refresh All" on the screen to view the receriving card model and firmware version.Identifying Driver & Decoder Chips:Please refer to the information on the back of the module or on the packaging (you may also contact the relevant project manager for confirmation)Check IC markings on the back of the moduleObtain information according to the correct configuration file provided by the manufacturer:Step 1: In the "Screen Configuration" dialog box on the main LCT interface, select the "Receiving Card" tab.Step 2: Load the correct configuration file provided by the screen manufacturer from the local computer:a. Click "Load from Local";b. Select the configuration file and click "Open";c. After the file is successfully loaded, click "OK".Step 3: Click "View Cabinet" to check the information in the pop-up dialog box.Obtain the Corresponding Correct Firmware Program:You can directly access the public resources through the following links:Novastar Database http://gts.novastar.tech:6150/sharing/oLGDYny5ENovastar Overseas Database http://gts.novastar.tech:6150/sharing/CZRitU08hStep 1: Directly access the Nova database mentioned above.Step 2: From the homepage, follow the path:"Firmware Program > Receiving Card”to enter the receiving card model classification page.Step 3: According to the Nova receiving card model confirmed above, enter the corresponding receiving card page. The following examples use DH-LCE7516 / FS-LCE7516 / MRV416.Step 4: According to the confirmed driver IC and decoder IC used on the module, search for the corresponding firmware in the order of 1, 2, 3, and 5.(Option 4 is firmware for the 99-series chips, and 99-series chips can be searched directly.)OverviewUsing the example above, each folder contains the corresponding firmware and descriptions of the supported chips. You can check the descriptions to identify the driver IC and decoder IC used on your module, and then determine which firmware should be used.Based on the confirmed Nova receiving card model and the driver/decoder ICs used on the LED module, you can find the correct corresponding firmware.Screen MonitoringMonitoring → Device Status:Check temperature, voltage, network cable connection, signal source, and abnormal alarm notifications.Preset Screen: Tools → Preset Screen SettingsSet the display image when the signal is lost or disconnected (such as black screen or fixed logo).TroubleshootingUnable to connect to the deviceCheck USB/network cable, power supply, and IP segment; disable the firewall.Screen garbled/flickeringVerify receiving card parameters, network cable quality, and HUB board (receiving card) wiring; resend the configuration.Program playback abnormalCheck media format and resolution compatibility; restart the player box or republish the program.

Send Your Inquiry Today

Factory Direct LED Screen - Fast Quote, Best Price!

Please enter your company name
Please accept the data protection information

I have read and understood the  data protection   information.